IKEA KALLAX Hack: Regale verbinden ohne Bohren

IKEA KALLAX Hack: Connect Shelves Without Drilling

You love your IKEA KALLAX shelving unit, but want to get even more out of your furniture? Then we have the perfect IKEA hack for you: With our KALLAX shelving unit connector, you can securely join several KALLAX shelving units together – without drilling new holes and without visible screws.

Why join KALLAX shelving units together?

KALLAX shelving units from IKEA are not only stylish, but also incredibly versatile. Whether as a sideboard, room divider, or storage system – few pieces of furniture can be used so flexibly.

When several KALLAX units are placed next to each other, small gaps quickly appear, and the units can shift individually. The solution? Our KALLAX shelving unit connector!

 

IKEA KALLAX shelving unit connector

Our shelving unit connector at a glance

What is it?
A connector made of durable PETG that screws into the pre-drilled holes from the inside, which are already present on the KALLAX. You don't need new holes – just a screwdriver.

What is it for?
For securely joining two or more upright KALLAX shelving units placed next to each other. From the outside, the connection remains invisible.

Does it fit my shelving unit?
The connector is a perfect fit for KALLAX shelving units manufactured from 2014 onwards with 3.7 cm thick side panels. It is too large for horizontal shelving units – write to us, and we will send you suitable adapters.

 

IKEA KALLAX shelving unit connector


Assembly in 3 steps

1. Align the shelving units: Place the shelving units on a level surface directly next to each other and align them so that the front and top edges are flush.

2. Position the connector: Position the connector from the inside against the existing pre-drilled holes of both shelving units.

3. Screw it in tightly: Screw it in tightly using the original IKEA screws – or order suitable screws directly with it. Done!

For a simple connection, one connector is usually sufficient. You get more stability with two: one at the top, one at the bottom.


The benefits of our shelving unit connector

✅ No new holes: Uses the existing pre-drilled holes of the KALLAX.
✅ Clean look: Installed from the inside – the connection is invisible from the outside.
✅ More stability: No shifting of shelving units placed next to each other.
✅ Maximum flexibility: Build your own KALLAX system – sideboard, shelving wall, or room divider.
✅ Two colors: Black and white, to match your shelving unit.

Even flatter: the KALLAX shelving unit connector plate

Do you want the connector to stand out as little as possible? The KALLAX shelving unit connector plate is only 3 mm thick and is also attached using the existing screws.

Shelving unit connector suitable for IKEA KALLAX - without drilling! Easy assembly

Important notes

Only for stationary shelving units: The connectors hold shelving units together that remain in place. Loosen them before moving or transporting the shelving units – otherwise, tension can build up and the connectors may break.

No tip-over protection: The connectors are not load-bearing and do not replace wall mounting. Always additionally secure tall shelving units to the wall using IKEA's tip-over protection.

Ideal for

- Continuous shelving walls in the living room

- Room dividers made of several KALLAX elements

- Storage space in the office or home office

- DIY enthusiasts and IKEA hackers

Frequently asked questions

Do I need tools?
Only a screwdriver for the existing KALLAX screws.

How many connectors do I need?
One per pair of shelving units, two for more stability.

Can I also join KALLAX shelving units on top of each other or horizontally?
The connector is designed for upright shelving units placed next to each other. For other configurations, contact us – we will tell you which solution is suitable.

And how do I join BILLY shelving units?
For that, there is the BILLY shelving unit snap-on connector.

Conclusion: This is how you get more out of your KALLAX!

If you are looking for a practical IKEA hack that really delivers, our KALLAX shelving unit connector is just right: more stability, more possibilities, and a clean look – without any new holes.

Go to the IKEA KALLAX shelving unit connector

IKEA and KALLAX are brands of Inter IKEA Systems B.V. CraftyHub is not affiliated with IKEA.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.